CRANKSHAFT REMOVAL

REMOVAL

RIGHT CRANKCASE CRANKSHAFT

CRANKSHAFT REMOVAL

Separate the crankcase (page 13-10).

Remove the transmission (page 13-11).

The crankshaft can Remove the crankshaft from the right crankcase.

be removed with the transmission installed.

INSPECTION

Turn the inner race of the crankshaft bearing with your finger.

CRANKSHAFT REMOVAL

The bearing should turn smoothly and quietly.

Also check that the bearing outer race fits tightly in the crankcase.

Replace any bearing if the race dose not turn smoothly, quietly, or if the outer race fits loosely in the crankcase (page 13-16).

Place the crankshaft on a stand or V-blocks.

CRANKSHAFT REMOVAL

Set the dial indicator on the main journal as shown. Rotate the crankshaft two revolutions (720°) and read the runout.

SERVICE LIMITS: L: 0.05 mm (0.002 in)

CRANKSHAFT REMOVAL

R: 0.03 mm (0.001 in)

Measure the connecting rod big end radial clear­ance in both X and Y directions.

SERVICE LIMIT: 0.05 mm (0.002 in)

FEELER GAUGE

CRANKSHAFT REMOVAL

Measure the connecting rod big end side clearance. SERVICE LIMIT: 0.75 mm (0.030 in)

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *

Confirm that you are not a bot - select a man with raised hand: