CLUTCH SYSTEM

10-20 mm (3/8 — 13/16 in)

CABLE END ADJUSTER

CLUTCH SYSTEM

Measure the clutch lever freeplay at the lever end. FREEPLAY: 10 — 20 mm (3/8 — 13/16 in)

Minor adjustments can be made with the cable end adjuster.

Turning the cable end adjuster in direction A will increase freeplay and turning it in direction В will decrease freeplay.

If the adjuster is threaded out near its limit and the correct freeplay cannot be reached, turn the adjuster in direction A until it seats lightly and then turn it out one turn in direction B.

Make the major adjustment with the in-line cable adjuster.

Major adjustments can be made with the in-line cable adjuster.

CABLE ADJUSTER

CLUTCH SYSTEM

Loosen the lock nut and turn the adjuster.

Tighten the lock nut.

If proper freeplay cannot be obtained using both procedures or the clutch slips during the test ride, disassemble and inspect the clutch (page 11-9).

CONTROL CABLES

BOLTS

CLUTCH SYSTEM

THROTTLE CABLE ENDS

— * /1L

Ш?’Ж’ ”"

Remove the dust cover and throttle housing bolts. Turn the handlebar to the right fully and remove the throttle housing from the handlebar.

Disconnect the throttle cable end from the throttle pipe.

It is not necessary to lubricate the entire cable.

Thoroughly lubricate the cable ends with a commer­cially available cable lubricant.

If the throttle operation is not smooth, replace the cable.

Be sure the throttle returns freely from fully open to fully closed automatically, in all steering positions.

CLUTCH SYSTEM

HOT START CABLE

CABLE ENDS

CLUTCH CABLE

Turn the adjuster and remove the clutch cable. Disconnect the clutch cable upper end and hot start cable upper end from the levers.

It is not necessary to lubricate the entire cable

Thoroughly lubricate the cable ends with a commer­cially available cable lubricant.

CLUTCH SYSTEM

ADJUSTER

If the clutch lever and hot start lever operation is not smooth, replace the cable.

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *

Confirm that you are not a bot - select a man with raised hand: