CARBURETOR DISASSEMBLY

JET NEEDLE/THROTTLE VALVE

CLAMP

CARBURETOR DISASSEMBLY

Disconnect the fuel hose, air vent hoses and over­flow hose.

Release the throttle position sensor wire from the clamp.

Remove the bolts, clamp, top cover and O-ring.

’05, ’06 shown: NEEDLE HOLDER „

CARBURETOR DISASSEMBLY

05, 06: Remove the needle holder and jet needle. After ’06: Remove the jet needle/holder assembly.

’05, ’06: Check the jet needle for wear, nicks or other dam­age.

After ’06:

CARBURETOR DISASSEMBLY

SCREW

CARBURETOR DISASSEMBLY

05. ’06: After 06

THROTTLE SHAFT ARM

ROLLER

THROTTLE VALVE PLATE

THROTTLE VALVE SEAL

THROTTLE VALVE

CARBURETOR DISASSEMBLY

Remove the throttle valve plate and roller from the throttle valve.

Check the throttle valve, throttle valve seal, roller and throttle valve plate for scratches, wear or dam­age.

Replace them if necessary.

Remove the throttle shaft torx screw.

Lift up the throttle shaft arm and remove the throttle valve assembly.

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *

Confirm that you are not a bot - select a man with raised hand: