BRAKE PEDAL

REMOVAL

PIVOT BOLT

BRAKE PEDAL

Remove the clip, brake pedal pivot bolt, washer and dust seals.

COTTER

BRAKE PEDAL

JOINT PIN

BRAKE PEDAL

Remove the return spring.

Remove and discard the cotter pin. Remove the joint pin and brake pedal.

INSTALLATION

Connect the brake pedal to the push rod. Install the joint pin and a new cotter pin.

Install the dust seals with their lip side facing out to the brake pedal.

WASHER DUST SEALS

PIVOT BOLT,—

BRAKE PEDAL

Apply grease to the sliding surface of the brake pedal and pivot bolt.

Install the washer and pivot bolt.

Tighten the brake pedal pivot bolt to the specified torque.

TORQUE: 36 N m (3.7 kgf-m, 27 lbf-ft)

Install the brake pedal clip securely.

Install the return spring

Добавить комментарий

Ваш e-mail не будет опубликован. Обязательные поля помечены *

Confirm that you are not a bot - select a man with raised hand: